34
edits
Changes
no edit summary
* Download "Sample Root Filesystem"
* Unpack (as root..) into rootfs directory inside of the BSP archive above.
* Run sudo ./tools/l4t_flash_prerequisites.sh
* Run <code>./apply_binaries.sh</code> from the BSP
** Note: If apply_binaries (or frankly, anything, this is brittle) fails, remove and recreate rootfs - the OS might be left in an unbootable state.
* Reboot AGX into "Recovery Mode" - hold the recovery button and reset button, release simultaneously ((sic) reset first?)
* Connect USB-C cable to the debug port ("front" USB-c)
* Nvidia AGX device should appear in the <code>lsusb</code>under NVIDIA CORP. APX* Run <code>./nvautoflashflash.sh</code>Different options for different usecases(https://docs.nvidia.com/jetson/archives/r36.3/DeveloperGuide/IN/QuickStart.html#in-quickstart)Jetson AGX Orin Developer Kit (eMMC): $ sudo ./flash.sh jetson-agx-orin-devkit internal
* Watch for few minutes, typically it crashes early, then go for lunch.
[[Category: Firmware]]
