K-Scale Motor Controller

From Humanoid Robots Wiki
Revision as of 21:18, 6 May 2024 by Matt (talk | contribs) (→‎Requirements: add CAN transceiver)
Jump to: navigation, search

This is the K-Scale Motor Controller design document.

Requirements

  • Microcontroller
    • STM
    • Other options:
      • integrated motor control MCUs
        • Infineon XMC4800[1]
        • NXP LPC1549[2]
      • MCU's
        • RP2040
  • Power supply
    • Assume we will have 48 volt power to the board
  • Communication
    • CAN bus
      • Texas Instruments ISO1050DUBR [3]
    • 1 mbps
  • Sensing
    • Temperature
    • Relative position
    • Absolute (single turn) position
    • Current sensing
  • Programming port
    • USB C

Design

References

  1. ↑ https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc4000-industrial-microcontroller-arm-cortex-m4/xmc4800/
  2. ↑ https://www.digikey.com/en/products/detail/nxp-usa-inc/LPC1549JBD64QL/4696352?utm_adgroup=&utm_source=google&utm_medium=cpc&utm_campaign=PMax%20Shopping_Product_Medium%20ROAS%20Categories&utm_term=&utm_content=&utm_id=go_cmp-20223376311_adg-_ad-__dev-c_ext-_prd-_sig-Cj0KCQjw_-GxBhC1ARIsADGgDjuYk7Hf3F-L_hoQ_4E-fPfjELknu3EAmm9IstEnc92wSAbIMEt0UZAaAsneEALw_wcB&gad_source=1&gclid=Cj0KCQjw_-GxBhC1ARIsADGgDjuYk7Hf3F-L_hoQ_4E-fPfjELknu3EAmm9IstEnc92wSAbIMEt0UZAaAsneEALw_wcB
  3. ↑ https://www.lcsc.com/product-detail/Isolated-CAN-Transceivers_Texas-Instruments-ISO1050DUBR_C16428.html
Retrieved from "https://humanoids.wiki/index.php?title=K-Scale_Motor_Controller&oldid=896"