Stompy PCB Designs

From Humanoid Robots Wiki
Revision as of 06:46, 1 May 2024 by Matt (talk | contribs) (Head)
Jump to: navigation, search

This document describes the PCBs that we use in Stompy

Head

  • Audio
    • DSP and Audio Codec
      • Analog Devices ADAU1452 [1]
    • Digital to Analog Converter
      • Texas Instruments PCM5102A [2]
    • Amplifier
      • Texas Instruments TPA3116D2 [3]
    • Microphone
      • 2x Infineon IM69D130 [4]
    • Speaker
      • FaitalPRO 3FE25 3" Full-Range Speaker Driver[5]

-- Need audio cable connection

-- Need Power connection

  • Video
    • 2x MIPI CSI-2 Cameras
  • Multiplexer
    • Video
      • MAX9286?


  • GMSL transmission
    • MAX96701 serializer
    • MAX96700 deserializer
    • MAX9295D dual 4-Lane MIPI CSI-2 to GMSL[6]

Body

Raspberry Pi CAN Hat
  • Compute Module
  • CAN
    • MCP2515: CAN Controller, SPI compatible (2.7V~5.5V) [7]
    • ATA6561: CAN Transceiver (4.5V~5.5V)[8]
    • MCP2551: CAN Transceiver (4.5V~5.5V)[9][10]
    • TLE6250G: CAN Transceiver (4.5V~5.5V)[11]
    • TJA1051: CAN Transceiver (4.5V~5.5V)[12]
    • SN65HVD230: CAN transceiver (3V~3.6V)[13]
  • Power regulation
    • AMS 1117
  • IMU
    • BerryGPS-IMU V4
      • Gyroscope and Accelerometer: LSM6DSL, compatible with SPI and I2C
      • Magnetometer: LIS3MDL, compatible with SPI and I2C
  • Ethernet (to communicate with the head and for debugging)

References