Open main menu

Humanoid Robots Wiki β

K-Scale Motor Controller

Revision as of 20:49, 6 May 2024 by Ben (talk | contribs) (Created page with "This is the K-Scale Motor Controller design document. === Requirements === * '''Microcontroller''' ** STM * '''Power supply''' ** Assume we will have 48 volt power to the bo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This is the K-Scale Motor Controller design document.

Requirements

  • Microcontroller
    • STM
  • Power supply
    • Assume we will have 48 volt power to the board
  • Communication
    • CAN bus
    • 1 mbps
  • Sensing
    • Temperature
    • Relative position
    • Absolute (single turn) position
    • Current sensing
  • Programming port
    • USB C

Design