Difference between revisions of "K-Scale Motor Controller"

From Humanoid Robots Wiki
Jump to: navigation, search
Line 6: Line 6:
 
** STM
 
** STM
 
** Other options:
 
** Other options:
*** Infineon XMC4800<ref>https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-
+
*** Infineon XMC4800<ref>https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc4000-industrial-microcontroller-arm-cortex-m4/xmc4800/</ref>
microcontroller-based-on-arm-cortex-m/32-bit-xmc4000-industrial-microcontroller-arm-cortex-m4/xmc4800/</ref>
 
 
*** NXP LPC1549
 
*** NXP LPC1549
 
*** RP2040
 
*** RP2040

Revision as of 21:11, 6 May 2024

This is the K-Scale Motor Controller design document.

Requirements

  • Microcontroller
    • STM
    • Other options:
      • Infineon XMC4800[1]
      • NXP LPC1549
      • RP2040
  • Power supply
    • Assume we will have 48 volt power to the board
  • Communication
    • CAN bus
    • 1 mbps
  • Sensing
    • Temperature
    • Relative position
    • Absolute (single turn) position
    • Current sensing
  • Programming port
    • USB C

Design

References