Difference between revisions of "SPIN Servo"
| Line 17: | Line 17: | ||
| interface = CAN bus, i2c | | interface = CAN bus, i2c | ||
}} | }} | ||
| + | |||
| + | [[Category:Actuators]] | ||
| + | [[Category:Stompy, Expand!]] | ||
Revision as of 00:16, 28 April 2024
The SPIN Servo as an open-source actuator developed by atopile.
| SPIN Servo | |
|---|---|
| Name | SPIN Servo |
| Manufacturer | Holry Motor |
| Cost | USD 30 (BOM) |
| Purchase | Link |
| Nominal Torque | 0.125nm |
| Peak Torque | 0.375nm |
| Weight | 311.6g |
| Dimensions | 42mmx42mmx60mm |
| Gear Ratio | Direct drive (bolt on options) |
| Voltage | 12V-24V |
| CAD | Link |
| Interface | CAN bus, i2c |
