Difference between revisions of "SPIN Servo"
Line 16: | Line 16: | ||
| cad_link = https://github.com/atopile/spin-servo-drive/tree/main/mech | | cad_link = https://github.com/atopile/spin-servo-drive/tree/main/mech | ||
| interface = CAN bus, i2c | | interface = CAN bus, i2c | ||
− | |||
}} | }} |
Revision as of 22:59, 25 April 2024
The SPIN Servo as an open-source actuator developed by atopile.
SPIN Servo | |
---|---|
Name | SPIN Servo |
Manufacturer | Holry Motor |
Cost | USD 30 (BOM) |
Purchase | Link |
Nominal Torque | 0.125nm |
Peak Torque | 0.375nm |
Weight | 311.6g |
Dimensions | 42mmx42mmx60mm |
Gear Ratio | Direct drive (bolt on options) |
Voltage | 12V-24V |
CAD | Link |
Interface | CAN bus, i2c |