Difference between revisions of "Servo Design"

From Humanoid Robots Wiki
Jump to: navigation, search
(Open Source Servos)
 
(One intermediate revision by one other user not shown)
Line 5: Line 5:
 
* [https://github.com/unhuman-io/obot OBot]
 
* [https://github.com/unhuman-io/obot OBot]
 
* [https://github.com/atopile/spin-servo-drive SPIN Servo Drive]
 
* [https://github.com/atopile/spin-servo-drive SPIN Servo Drive]
* [https://github.com/jcchurch13/Mechaduino-Firmware]
+
* [https://github.com/jcchurch13/Mechaduino-Firmware Mechaduino-Firmware]
  
 
=== Commercial Servos ===
 
=== Commercial Servos ===
Line 14: Line 14:
  
 
* [https://github.com/napowderly/mcp2515 MCP2515 tranceiver circuit]
 
* [https://github.com/napowderly/mcp2515 MCP2515 tranceiver circuit]
 +
* [https://github.com/adamb314/ServoProject ServoProject: making a standard servo 36x more accurate]
  
 
[[Category: Hardware]]
 
[[Category: Hardware]]
 
[[Category: Electronics]]
 
[[Category: Electronics]]
 
[[Category: Actuators]]
 
[[Category: Actuators]]

Latest revision as of 00:44, 2 May 2024

This page contains information about how to build a good open-source servo.

Open Source Servos[edit]

Commercial Servos[edit]

Controllers[edit]