Difference between revisions of "Stompy To-Do List"
(Created page with "This document acts as a progress tracker for the Stompy robot build. == To Do == === Teleop === * Create a VR interface === Firmware === * Get * === Electronics ===...") |
(No difference)
|
Revision as of 19:24, 29 April 2024
This document acts as a progress tracker for the Stompy robot build.
Contents
To Do
Teleop
- Create a VR interface
Firmware
- Get
Electronics
- Understand how to build a PCB and update the Building a PCB guide
- Get PCBs designed and shipped
- Two PCBs: One for the head and one for the body
- Head PCB will mount a Jetson Nano. It will have two MIPI CSI ports for two cameras from the eyes, plus audio and speakers. The Jetson Nano will act as a "tokenizer" which multiplexes the signals over ethernet to the main board in the body
- The body PCB will mount a full Jetson Orin, as well as the IMU, CAN tranceivers, and power management
- Debug issues with the CAN Bus - specifically, write our own driver for the MCP2515 IC (one of the most common ICs for sending and receiving messages over a CAN bus)
