View source for Stompy PCB Designs

This document describes the PCBs that we use in Stompy

== Head ==
* Audio
** DSP and Audio Codec
*** Analog Devices ADAU1452 <ref>https://www.lcsc.com/product-detail/Audio-Interface-ICs_Analog-Devices-ADAU1452KCPZ_C468504.html</ref>
** Digital to Analog Converter
*** Texas Instruments PCM5102A <ref> https://www.lcsc.com/product-detail/Digital-To-Analog-Converters-DACs_Texas-Instruments-Texas-Instruments-PCM5102APWR_C107671.html </ref>
** Amplifier
*** Texas Instruments TPA3116D2 <ref>https://www.lcsc.com/product-detail/Audio-Power-OpAmps_Texas-Instruments-TPA3116D2DADR_C50144.html</ref>
** Microphone
*** 2x Infineon IM69D130 <ref>https://www.lcsc.com/product-detail/MEMS-Microphones_Infineon-Technologies-IM69D130V01_C536262.html</ref>
**Speaker
*** FaitalPRO 3FE25 3" Full-Range Speaker Driver<ref>https://faitalpro.com/en/products/LF_Loudspeakers/product_details/index.php?id=401000150</ref>
***

-- Need audio cable connection

-- Need Power connection

-- Need SPI Connections

* Video
** 2x MIPI CSI-2 Cameras
* Multiplexer
** Video
*** MAX9286?


*** 
* GMSL transmission
** MAX96701 serializer
** MAX96700 deserializer
** MAX9295D dual 4-Lane MIPI CSI-2 to GMSL<ref>https://www.analog.com/en/products/max9295d.html</ref>

== Body ==

[[File:Raspberry Pi CAN hat.jpg|thumb|right|Raspberry Pi CAN Hat]]
* Compute Module
* CAN
** MCP2515: CAN Controller, SPI compatible (2.7V~5.5V) <ref>https://www.lcsc.com/product-detail/CAN_MICROCHIP_MCP2515-I-SO_MCP2515-I-SO_C12368.html</ref>
** ATA6561: CAN Transceiver (4.5V~5.5V)<ref> https://www.lcsc.com/product-detail/CAN-ICs_Microchip-Tech-ATA6561-GAQW-N_C616016.html</ref>
** MCP2551: CAN Transceiver (4.5V~5.5V)<ref>https://www.seeedstudio.com/I2C-CAN-Bus-Module-p-5054.html</ref><ref>https://www.lcsc.com/product-detail/CAN-ICs_Microchip-Tech-MCP2551-I-SN_C7376.html</ref>
** TLE6250G: CAN Transceiver (4.5V~5.5V)<ref>https://www.lcsc.com/product-detail/CAN_Infineon_TLE6250G_TLE6250G_C111030.html </ref>
** TJA1051: CAN Transceiver (4.5V~5.5V)<ref>https://www.lcsc.com/product-detail/CAN-ICs_NXP-Semicon-TJA1051TK-3-118_C124020.html </ref>
** SN65HVD230: CAN transceiver (3V~3.6V)<ref>https://www.lcsc.com/product-detail/CAN-ICs_Texas-Instruments-SN65HVD230QDR_C16468.html</ref>

* Power regulation
** AMS 1117
* IMU
** [https://ozzmaker.com/product/berrygps-imu/ BerryGPS-IMU V4]
*** Gyroscope and Accelerometer: LSM6DSL, compatible with SPI and I2C
*** Magnetometer: LIS3MDL, compatible with SPI and I2C
* Ethernet (to communicate with the head and for debugging)

=== References ===
<references/>

[[Category: Electronics]]